F-16

seitz2c · 08-10-2008, 08:55 PM

F-16 pusher fan fold foam 10.2 oz. GBV 14T cc phoenix 10 ESC 800 Mah 3s lipo pusher wing span 18"

seitz2c · 06-05-2009, 09:38 AM

The GBV 14T with an APC 5.5 prop worked out great ! plenty of power

a little weight was needed in the nose to hit the CG so a slightly larger battery was installed 1000 MAH 3s.

carbon fiber rods were added to the leading edge of the wing to prevent landing damage to the leading edge.

It gets real small real fast . the grey camo does'nt help . I'm looking foe a more visable color scheme.

dsny · 06-06-2009, 10:48 PM

very nice job!
well done and thanks for posting
Dan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-05-2009, 09:38 AM	#2
seitz2c New Member Join Date: Dec 2005 Location: Iowa Posts: 12	The GBV 14T with an APC 5.5 prop worked out great ! plenty of power a little weight was needed in the nose to hit the CG so a slightly larger battery was installed 1000 MAH 3s. carbon fiber rods were added to the leading edge of the wing to prevent landing damage to the leading edge. It gets real small real fast . the grey camo does'nt help . I'm looking foe a more visable color scheme.

06-06-2009, 10:48 PM	#3
dsny Gobrushless.com MicroDAN Join Date: Sep 2004 Location: north carolina Posts: 29	very nice job! well done and thanks for posting Dan