- Building a scratch heli. Ideas, designs, do's and don'ts!
- Micro Flying Wing www.wingbat.co.uk
- Searching for GB motor for DraganFlyer4-style helicopter
- Unicornwings.com Gryphon
- Oooooh nooooooooooo! ;-)
- replace speed 400 motor
- hmm How to mount the BL motor on the heli?
- Using two CD Rom motors from one Speed controller
- Props
- A Question of Thrust
- custom can
- custom cans
- back in stock?
- Bipe set-up
- help!
- I need a prop adapter!
- what GB power plant will do for a 36inc wing?
- Tailess Bipe
- Phoenix V.S. Jeti (or others if you prefer)
- Help!!!
- flying wing GBv1.1 i dont know what winding *lost* :S
- Newbie needs help with first motor
- 10 turn 24awg20mm stator
- Why bother?
- CDrom motor convertion
- help picking the best setup
- What Type of Setup for EDF Units (Electric Duct Fans).
- cant post a pic??
- VCR motor
- Converting a Kadet Senior ARF to Electric
- ??Rascal Conversion??
- E-Starter brushless??
- GBL Windows Applications
- ESC over current tolerance
- Motor for GWS Formosa
- Just another Tiny X!
- AMA Show in Ontario, CA Next Weekend!
- What choice for Tensor
- Surface Mount Component Repair
- CF Flat Stock
- Reduction Drives
- WRAM
- where to get the best late model lipo for less? In US
- Ikarus SU-27 w/GB1.1 Help!
- Weights
- brushed to brushless
- Convert 1/2a (.049) plans to brushless
- RTF T-Hawk
- I thinkin about buying a flapper thingy inputs?
- Power supply Ideas.
- ESC wire lengths
- Obtaining CD drive parts?
- Lipo Duration estimates
- I got a heli!
- Brushless Zagi
- Slow Stick aileron trainer on the cheap.
- Tail Rotors
- 10 pole motor on heli?
- Have you ever done anything STUPID?
- Wing Dragon
- Airplane Design/Sailplane Designer's Handbook
- Aluminum Landing Gear
- I'm stoked! I finally have a heli on the way.
- Safety issue? Partial throttle ESC over heat.
- Adjustable pitch motormount
- GB trouble, please help anyone
- gbv 20 ultimate bipe
- helicopter shaft -> which bearing?
- 0-80 and 1-72 screws
- advice on wingspan,chord,and airfoil shape
- Go Brushless Saves the Day
- I Need help
- HB FP Motor
- Castle Creations Thunderbird ESC
- Which kit for a first?
- new e-flight calculator
- CDR Motor Problems
- How do I mount it in an EDF
- 8 modified GBV's on one plane with a 126" wingspan
- Recommended turns for a 1000Kv motor
- Home built Wilga converted from Norvel .61 to double whopper
- 2 mm Heli output shaft
- Base where to start???
- Hard Drive Stators
- Smoking wires
- need a powerful motor
- BLDC controllers
- Go really fast with the Gb v1.1 and Wasp flying wing...
- Brushless ESC question
- Motor mount..
- four motor design
- The core windings on the HOME page